Safepower S
Description
Safepower S UPS series, are suitable for all applicationsSafepower S UPS series, are suitable for all applicationswhere the protection of critical load are requested, fromthe simplest to the most complicated installations wherethe demand for reliability and maintainability is higherSafepower S is compatible with industrial installationsand most critical Information Technology (IT)thanks to the high levels of performance.
- Efficiency up to 94,5%
- Cos phi 0.9 output
- Input Power Factor at full load: 0.99
- Low voltage distortion <3%
- Design transformer-free
- Parallelable up to 4 units
- Cold start mode from battery
- EN50171 compliant
- Frequency converter mode setting
- Monitoring with SNMP, RS232, USB, modbus
| Size in kVA | 10 | 15 | 20 | 30 | 40 |
|---|---|---|---|---|---|
| ELECTRICAL DATA | |||||
| Active Power with PF from 0.9 inductive to 0.9 capacitive (kW) |
9 | 13,5 | 18 | 27 | 36 |
| INPUT DATA | |||||
| Nominal voltage Vac | 380/400/415 Three-Phase plus Neutral | ||||
| Nominal frequency (Hz) | 50 / 60 | ||||
| THDI (%) | ≤ 3 % | ||||
| Power factor with full load | 0,99 pf | ||||
| OUTPUT DATA | |||||
| Nominal voltage Vac | 380/400/415 Three-Phase plus Neutral | ||||
| Nominal frequency (Hz) | 50 / 60 | ||||
| Static Stability | ± 1% | ||||
| Restore within ± 1% In compliance with EN 62040-3, Class 1 | 20msec | ||||
| Voltage distortion with linear load / with no linear load (EN 62040-3) |
≤ 1% / ≤ 3% | ||||
| GENERAL DATA | |||||
| Dimensions (WXDXH) mm | 250x828x868 | ||||
| Max. weight without/with batteries inside (Kg) | 75/115 | 63/170 | 64/171 | 71/223 | 73 |
| Cabinet protection degree | IP20 | ||||
| Operating temperature (C°) | 0 ± 40 ºC | ||||
| Standards | CE – IEC EN 62040 1-2-3 | ||||